Our Products
Henter produkter...
Medalje OphængThe medal hanger with a runner design is intended for anyone who would like to display their medals on the wall instead of keeping them in a drawer. It keeps the medals together in one place where they can be seen and enjoyed. There is room for 15 medals on the individual pegs. If you have more medals, an additional layer can be added by placing the medal ribbons across two or three pegs. This allows the extra medals to hang offset from the first row. The runner is part of the design, making the hanger suitable for anyone who has collected medals from different running events. The medal hanger is made from plywood and measures approximately 37 cm wide and 20 cm high. It is mounted directly on the wall using two nails or screws. • Made from plywood • Medal hanger with a runner design • Room for 15 medals • Option to add an extra offset layer • Measures approximately 37 x 20 cm Summary: A plywood medal hanger with a runner design, room for 15 medals and the option to display additional medals in a second layer.
MobilholderPhone Holder with Cut-Out Dog The phone holder with a cut-out dog gives your phone a designated place when you are not holding it. It can stand on a desk, shelf or table, keeping your phone within reach. The dog design adds a personal touch for anyone who would like to keep the holder on display. The holder is made of plywood and measures approximately 9.5 × 20 cm. You can use it at home, in an office or in a workshop. It provides a place for your phone instead of leaving it among other items on the table. The cut-out dog is part of the holder’s design. The holder could also make a small gift for a dog owner who would like a place for their phone on a desk or shelf. Plywood is a natural wood product. Its colour and grain may vary slightly from one holder to another. These variations can affect the finished appearance, so the holder you receive may differ a little from the one shown in the product photos. Any phone shown in the product photos is included only to demonstrate how the holder is used. The phone is not included. Made of plywood with a cut-out dog design Measures approximately 9.5 × 20 cm Can stand on a table, shelf or desk Wood colour and grain may vary Phone not included Summary: Plywood phone holder with a cut-out dog design. It measures approximately 9.5 × 20 cm. The natural colour and grain of the wood may vary slightly.
Mobilholder
MobilholderPhone Holder with Cut-Out Paw The phone holder with a cut-out paw gives your phone a designated place when you are not holding it. It can stand on a desk, shelf or table, keeping your phone visible and within reach. The holder is made of plywood and measures approximately 9.5 × 20 cm. The cut-out paw is part of the design and makes the holder a suitable choice for an animal lover. It can be used at home, in an office or in a workshop. Plywood is a natural wood product, so its colour and grain may vary slightly from one holder to another. The holder you receive may therefore differ a little from the one shown in the product photos. Any phone shown in the product photos is included only to demonstrate how the holder is used. The phone is not included. Made of plywood with a cut-out paw design Measures approximately 9.5 × 20 cm For a table, shelf or desk Wood colour and grain may vary Phone not included Summary: Plywood phone holder with a cut-out paw design. It measures approximately 9.5 × 20 cm. The natural colour and grain of the wood may vary slightly.
MobilholderFcm Phone Holder with Cut-Out Wolf The Fcm phone holder gives your phone a designated place when you are not holding it. It can stand on a desk, shelf or table, keeping your phone visible and within reach. The holder is made of plywood and measures approximately 9.5 × 20 cm. The wolf is cut out of the holder and forms part of its design. You can use the holder at home, in an office or in a workshop when you would like a designated place for your phone. Plywood is a natural wood product, so its colour and grain may vary slightly from one holder to another. The holder you receive may differ a little from the one shown in the product photos. Any phone shown in the product photos is included only to demonstrate how the holder is used. The phone is not included. Made of plywood with a cut-out wolf Measures approximately 9.5 × 20 cm For a table, shelf or desk Wood colour and grain may vary Phone not included Summary: Fcm plywood phone holder with a cut-out wolf. It measures approximately 9.5 × 20 cm. The wood’s colour and grain may vary slightly.
MobilholderFcm Phone Holder with Engraved Wolf The Fcm phone holder gives your phone a designated place when you are not holding it. It can stand on a desk, shelf or table, keeping your phone visible and within reach. The holder is made of plywood and measures approximately 9.5 × 20 cm. The wolf is engraved into the wood as part of the holder’s design. You can use the holder at home, in an office or in a workshop when you would like a designated place for your phone. Plywood is a natural wood product, so its colour and grain may vary slightly from one holder to another. These variations can also affect the finished appearance. The holder you receive may therefore differ a little from the one shown in the product photos. Any phone shown in the product photos is included only to demonstrate how the holder is used. The phone is not included. Made of plywood with an engraved wolf Measures approximately 9.5 × 20 cm For a table, shelf or desk Wood colour and grain may vary Phone not included Summary: Fcm plywood phone holder with an engraved wolf. It measures approximately 9.5 × 20 cm. The wood colour and finished appearance may vary slightly.
Mobilholder
DiverseThis sign measures 13 x 18 cm and comes in an oak frame. It is a small sign for anglers who would like to display a little fishing humour at home, in the office or alongside their fishing equipment. The sign features the English text: “If you’re looking for a sign to go fishing, this is it.” Below the text is a motif showing a fish about to bite the hook. The text, border and fish motif are made directly in the plywood panel. The light oak frame creates a clear border around the darker panel and brings the design together. Measuring 13 x 18 cm, the sign does not take up much space. It can be placed on a desk, shelf or table where both the text and fishing motif remain visible. The sign is particularly suitable for anglers who do not need a lengthy explanation to find a reason for their next fishing trip. It can be used as a decoration for yourself or given as a gift to someone who enjoys fishing. • Plywood sign measuring 13 x 18 cm • Supplied with an oak frame • English text featuring fishing humour • Fish and fishing-hook motif • Intended for anglers Summary: A 13 x 18 cm plywood sign in an oak frame featuring humorous English text and a fishing motif.
From the WoodshopThis round minibar is made from reclaimed pallet wood and provides a fixed place for storing bottles and glasses. It measures 73 cm in diameter and is designed to hang on the wall, keeping its contents visible and gathered in one place. The minibar has room for three bottles on the built-in shelf. There is also space for two glasses beside the bottles, allowing a small selection of bottles and glasses to be kept together and within easy reach. Below the shelf are three holders for stemmed glasses. The bases of the glasses slide into the holders, allowing them to hang underneath the shelf. The minibar therefore accommodates five glasses in total: three hanging stemmed glasses and two glasses standing on the shelf. As the minibar is made from reclaimed pallet wood, the colour, structure, grain and previous signs of use may vary. Each minibar can therefore have its own appearance depending on the pieces of wood used. The minibar is intended for anyone who would like to keep bottles and glasses together and on display. It can be used in a home bar or another suitable place with enough wall space. • Made from reclaimed pallet wood • Round design measuring 73 cm in diameter • Room for 3 bottles • Holders for 3 hanging stemmed glasses • Space for 2 additional glasses on the shelf Summary: A round, wall-mounted minibar made from reclaimed pallet wood with room for three bottles and five glasses.
NøgleringeA walnut wood keychain featuring a simple wooden plaque, PU leather, and a metal ring. The natural texture of the wood gives the keychain a clean, minimalist look where the wood grain becomes a visible part of the design. The wooden plaque measures approximately 6.5 x 2.8 cm, while the metal ring has an outer diameter of around 3 cm. The keychain is compact and lightweight, making it easy to carry in your pocket or bag alongside your keys. Featuring smooth edges, the wooden plaque is attached to the metal ring with durable PU leather. The combination of wood, PU leather, and metal creates an understated look, perfect for a personalized keychain. Use it for your everyday keys, or make it a thoughtful, personal gift—customized with a name, a short message, or a graphic of your choice. Have an idea for your own design? Send us a message, and we will bring it to life. Walnut wood plaque keychain Plaque dimensions: approx. 6.5 x 2.8 cm Metal ring outer diameter: approx. 3 cm Attached with PU leather Compact and lightweight Summary: A clean, walnut wood keychain with PU leather and a metal ring, customizable with your own personal design.
NøgleringeA natural beech wood keychain featuring a simple wooden plaque, PU leather, and a metal ring. The natural texture of the wood ensures that every keychain has its own unique look and wood grain variation. The wooden plaque measures approximately 6.5 x 2.8 cm, while the metal ring has an outer diameter of around 3 cm. Its compact and lightweight design makes it easy to carry in your pocket, bag, or keep alongside your everyday keys. Featuring smooth edges, the beech wood plaque is connected to the metal ring with PU leather. This combination creates a clean, understated keychain where the natural wood remains the focal point. Have an idea for your own design? Describe it further down the page, and we will make it for you. This makes the keychain ideal if you want a custom touch for your own keys or a small, personalized gift for someone else. Crafted from natural beech wood with visible, unique wood grain Plaque dimensions: approx. 6.5 x 2.8 cm Metal ring outer diameter: approx. 3 cm Connected with PU leather and metal keyring Compact and lightweight Summary: A compact, natural beech wood keychain with PU leather and a metal ring, fully customizable based on your own idea.
Bordskåner
Cutting board
Cutting board
Medalje OphængThe football medal hanger is intended for anyone who would like to display their medals on the wall instead of keeping them in a drawer. It keeps the medals together in one place, where they can be seen and enjoyed. The medals are hung from the individual pegs. There is room for 8 medals when one medal is placed on each peg. If you have more medals, an additional layer can be added by placing each medal ribbon across two or three pegs. This allows the additional medals to hang offset from the first row. The football is part of the design, making the hanger suitable for football players who have collected medals from matches, tournaments or other football experiences. The medal hanger is made from plywood and measures 20 cm wide and 25 cm high. It is mounted directly on the wall using two nails or screws. • Made from plywood • Medal hanger with a football design • Room for 8 medals on the individual pegs • Option to add an extra offset layer of medals • Measures 20 x 25 cm and mounts with 2 nails or screws Summary: A plywood football medal hanger with room for 8 medals and the option to display additional medals in a second layer.
Medalje OphængThe volleyball medal hanger is intended for anyone who would like to display their medals on the wall instead of keeping them in a drawer. It keeps the medals together in one place where they can be seen and enjoyed. There is room for 10 medals on the individual pegs. If you have more medals, an additional layer can be added by placing the medal ribbons across two or three pegs. This allows the extra medals to hang offset from the first row. The volleyball is part of the design, making the hanger suitable for volleyball players who have collected medals from matches, tournaments or other volleyball activities. It can be mounted in a bedroom or another place where the medals can remain visible. • Made from plywood • Medal hanger with a volleyball design • Room for 10 medals • Option to add an extra offset layer • Measures 20 x 25 cm Summary: A plywood volleyball medal hanger with room for 10 medals and the option to display additional medals in a second layer.
Medalje OphængThe trophy-shaped medal hanger is intended for anyone who would like to display their medals on the wall instead of keeping them in a drawer. It keeps the medals together in one place, where they can be seen and enjoyed. There is room for 5 medals on the individual pegs. Additional medals can be displayed in a second layer by placing the medal ribbons across two or three pegs. This allows the extra medals to hang offset from the first row. The trophy design makes the hanger suitable for medals from different sports, competitions and tournaments. It can be mounted in a bedroom or another place where the medals can remain visible. • Made from plywood • Trophy-shaped medal hanger • Room for 5 medals on the individual pegs • Option to add an extra offset layer of medals • Measures 25 x 25 cm and mounts with 2 nails or screws Summary: A trophy-shaped plywood medal hanger with room for 5 medals and the option to display additional medals in a second layer.
Medalje OphængThe medal hanger is intended for anyone who would like to display their medals on the wall instead of keeping them in a drawer. It keeps the medals together in one place where they can be seen and enjoyed. There is room for 12 medals on the individual pegs. If you have more medals, an additional layer can be added by placing the medal ribbons across two or three pegs. This allows the extra medals to hang offset from the first row. Choose between three designs: a volleyball, a female volleyball player or a male volleyball player. The hanger is suitable for players who have collected medals from matches, tournaments or other volleyball activities. • Made from plywood • Choose a volleyball, female player or male player • Room for 12 medals • Option to add an extra offset layer • Measures 37 x 20 cm Summary: A plywood medal hanger with room for 12 medals and a choice of three volleyball-related designs.
Medalje OphængThe medal hanger is for anyone who would like to display their medals on the wall instead of keeping them in a drawer. It keeps the medals together in one place where they can be seen and enjoyed. There is room for 12 medals on the individual pegs. If you have more medals, an additional layer can be added by placing the medal ribbons across two or three pegs. This allows the extra medals to hang offset from the first row. You can choose between three different designs: a football, a female football player or a male football player. This makes the hanger suitable for players who have collected medals from matches, tournaments and other football activities. • Made from plywood • Choose a football, female player or male player • Room for 12 medals on the individual pegs • Option to add an extra offset layer • Measures 37 x 20 cm Summary: A plywood medal hanger with room for 12 medals and a choice of three football-related designs.
LED-base med fjernbetjening og USB-kabel er beregnet til akryl eller plexiglas med dit eget billede eller din egen grafik. Når motivet placeres i basen, bliver det oplyst med LED-lys og kan bruges som dekorationslampe eller natlampe. Du kan vælge mellem syv forskellige ensfarvede lystilstande. Farven styres enten med touch-funktionen på basen eller med den medfølgende fjernbetjening. Lyset kan desuden dæmpes, så lysstyrken kan tilpasses efter behov og placering. LED-basen kan få strøm på to måder. Den kan tilsluttes med det medfølgende USB-kabel eller bruges med tre AA-batterier, som placeres i bunden. Batterier medfølger ikke. USB-kablet kan tilsluttes en kompatibel USB-strømport, eksempelvis en bærbar computer, USB-powerbank eller USB-strømforsyning. Med dit eget billede eller grafik kan du lave lampen personlig. Det kan eksempelvis være et navn, en figur, et logo eller et andet motiv, som du ønsker oplyst. Den kan derfor bruges på værelset, kontoret eller andre steder, hvor du ønsker dekorativ belysning. • Til akryl eller plexiglas med eget motiv • 7 ensfarvede lystilstande med dæmpning • Touch-betjening og fjernbetjening • Strøm via USB-kabel eller 3 AA-batterier • Strømforbrug 0,012 kWh pr. døgn og oplyst LED-levetid på 10.000 timer Summary: En LED-base til din personlige akryl- eller plexiglaslampe med syv farver, fjernbetjening, touch og mulighed for både USB- og batteridrift.
Acrylic LED lightLED-base med fjernbetjening og USB-kabel er beregnet til akryl eller plexiglas med dit eget billede eller din egen grafik. Når motivet placeres i basen, bliver det oplyst med LED-lys og kan bruges som dekorationslampe eller natlampe. Du kan vælge mellem syv forskellige ensfarvede lystilstande. Farven styres enten med touch-funktionen på basen eller med den medfølgende fjernbetjening. Lyset kan desuden dæmpes, så lysstyrken kan tilpasses efter behov og placering. LED-basen kan få strøm på to måder. Den kan tilsluttes med det medfølgende USB-kabel eller bruges med tre AA-batterier, som placeres i bunden. Batterier medfølger ikke. USB-kablet kan tilsluttes en kompatibel USB-strømport, eksempelvis en bærbar computer, USB-powerbank eller USB-strømforsyning. Med dit eget billede eller grafik kan du lave lampen personlig. Det kan eksempelvis være et navn, en figur, et logo eller et andet motiv, som du ønsker oplyst. Den kan derfor bruges på værelset, kontoret eller andre steder, hvor du ønsker dekorativ belysning. • Til akryl eller plexiglas med eget motiv • 7 ensfarvede lystilstande med dæmpning • Touch-betjening og fjernbetjening • Strøm via USB-kabel eller 3 AA-batterier • Strømforbrug 0,012 kWh pr. døgn og oplyst LED-levetid på 10.000 timer Summary: En LED-base til din personlige akryl- eller plexiglaslampe med syv farver, fjernbetjening, touch og mulighed for både USB- og batteridrift.
Acrylic LED lightLED-base med fjernbetjening og USB-kabel til brug sammen med akryl eller plexiglas. Basen oplyser den monterede 4mm akryl- eller plexiglasplade og kan bruges som en dekorationslampe. Den er beregnet til dig, der ønsker en enkel base med forskellige lysfarver og mulighed for at tilpasse lysstyrken. LED-basen har syv forskellige lysfarver. Du kan skifte mellem farverne med den medfølgende fjernbetjening. Lyset er desuden dæmpbart, så du kan justere lysstyrken efter behov. Det giver mulighed for at vælge både farve og lysstyrke, så belysningen passer til placeringen og den ønskede stemning. Basen kan få strøm på to forskellige måder. Den kan drives af tre AA-batterier, som placeres i bunden af basen. Batterier medfølger ikke og skal derfor købes separat. Batteridriften gør det muligt at bruge lampen uden en fast forbindelse til en USB-strømport. Du kan også strømforsyne LED-basen med det medfølgende USB-kabel. Kablet kan tilsluttes en kompatibel USB-strømport, eksempelvis på en bærbar computer, en USB-powerbank eller en USB-strømforsyning i hjemmet. Det giver flere muligheder for at vælge den strømforsyning, der passer bedst til den ønskede placering. Det oplyste strømforbrug er 0,012 kWh pr. 24 timer, hvilket svarer til 4,4 kWh om året. Den oplyste levetid for LED-lyset er 10.000 timer. • LED-base til 4mm akryl eller plexiglas • Syv forskellige lysfarver med dæmpbar lysstyrke • Fjernbetjening og USB-kabel medfølger • Kan drives med tre AA-batterier eller via USB • Strømforbrug på 0,012 kWh pr. døgn og oplyst LED-levetid på 10.000 timer Kort fortalt: En LED-base til dekorationslamper i akryl eller plexiglas. Basen har syv dæmpbare lysfarver og kan strømforsynes med tre AA-batterier eller det medfølgende USB-kabel. Batterier medfølger ikke.
CoasterRund glasbrik i skiffer med en diameter på 10 cm. Den sorte skiffer giver glasbrikken et enkelt og naturligt udtryk og kan bruges som underlag til glas, kopper og krus. Med en diameter på 10 cm er der god plads til almindelige glas og kopper. Den runde form gør glasbrikken enkel i udtrykket, mens den sorte farve passer ind mange steder. Glasbrikken kan bruges på spisebordet, sofabordet, skrivebordet eller andre steder, hvor du gerne vil have et fast underlag til dit glas eller din kop. Den kan bruges både til hverdag, når kaffen kommer på bordet, og når der dækkes op til gæster. Skiffer er et naturmateriale, og den sorte overflade giver glasbrikken det karakteristiske skifferudtryk. Det enkle design betyder, at fokus er på selve materialet uden en masse dikkedarer. Glasbrikken kan bruges enkeltvis eller flere sammen, hvis der skal være en til hver plads omkring bordet. Det runde format gør samtidig brikken nem at placere under forskellige typer glas og kopper. • Fremstillet i skiffer • Rund model med en diameter på 10 cm • Sort i farven • Kan bruges som underlag til glas, kopper og krus Summary: En enkel, rund og sort glasbrik i skiffer med en diameter på 10 cm. Til dig, der ønsker et naturligt underlag til glas, kopper eller krus.
CoasterRund glasbrik i kork med en diameter på 10 cm. Den klassiske korkfarve giver glasbrikken et naturligt og enkelt udtryk, der passer fint på både spisebordet, sofabordet og skrivebordet. Glasbrikken kan bruges som underlag til glas, kopper og krus. Med en diameter på 10 cm er der plads til mange almindelige glas og kopper, og den runde form gør den nem at placere på bordet. Korkens klassiske farve giver et varmt og naturligt udtryk uden en masse dikkedarer. Glasbrikken kan bruges til hverdag, når kaffen eller en kold drik kommer på bordet, men også når der dækkes op til gæster. Glasbrikken er fremstillet i kork og kan bruges enkeltvis eller flere sammen. Du kan eksempelvis have en liggende fast på skrivebordet eller bruge et sæt på spisebordet, så der er en glasbrik til hver plads. Det enkle design og den naturlige korkfarve gør, at selve materialet er en synlig del af udtrykket. • Fremstillet i kork • Rund model med en diameter på 10 cm • Klassisk, naturlig korkfarve • Kan bruges som underlag til glas, kopper og krus Summary: En enkel, rund glasbrik i klassisk korkfarve med en diameter på 10 cm, beregnet som underlag til glas, kopper og krus.